Tile & Grout Coverage Calculator
Grout mass from tile size, joint width and joint depth, with the waste percentage stated.
Grout per square metre is the sum of the tile sides over their product, times the joint width, times the joint depth in metres, times 1600 kg per cubic metre. That is multiplied by area and your waste percentage, in metric units.
A zero or negative tile side, joint width or depth is refused by the field it was typed in, because each appears in a product. The formula with your figures is printed beneath the answer.
Every figure is an ordering estimate, not a structural specification, and none of it replaces an engineer's take-off. The arithmetic runs in your browser: nothing is uploaded and nothing is stored, so the same input prints the same answer on every reload.
Grout per square metre is the sum of the tile sides over their product, times the joint width, times the joint depth in metres, times 1600 kg per cubic metre; that is multiplied by area and your waste percentage. A 300 × 300 mm tile with a 3 mm joint 8 mm deep over 15 m² at 10 percent therefore reads 0.256 kg/m² and 4.22 kg, in metric units.
Metric grout mass from tile size, joint width, joint depth and area, with waste.
An ordering estimate, not a structural specification.
How to use it
Enter the tile sides in millimetres, the joint width and depth in millimetres, the area in square metres and a waste percentage, then press Run. The page prints the grout per square metre, the mass for the area and the mass with waste.
Waste and units
The sum of the sides over their product is the joint length per square metre of tile, so the formula counts joints once rather than twice. Joint width and depth are converted to metres before they multiply, and 1600 kg/m³ is the grout density the page applies, printed with the answer so the figure can be reworked.
Where the page stops
A zero or negative tile side, joint width or depth is refused by the field it was typed in, because each appears in a product. Grout density varies by product, and a large-format tile with a wide joint takes proportionally more; the page states the density it used and does not model the mixing water.
What to Expect
Best for
- Estimating grout mass from a tile size and joint dims.
- Seeing the per-square-metre figure behind the total.
What this tool keeps
- The per-square-metre mass and the density print, so the total can be reworked at another area.
What may need cleanup
- Nothing: the per-metre figure and the total are the whole output.
Sample input
300 × 300 mm tile, 3 mm joint, 8 mm deep, 15 m², 10 percent waste
Sample output
Joint length: (0.3 + 0.3) ÷ 0.09 = 6.667 m per m² Grout: 6.667 × 0.003 × 0.008 × 1600 = 0.256 kg/m² For 15 m² with 10 percent: 4.22 kg
Frequently asked questions
How much grout do I need?
Enter the tile sides, joint width and depth, the area and a waste percentage, then press Run. The page prints the grout per square metre and the mass for the area.
Is anything uploaded?
No. The formula is evaluated in this tab: nothing is sent, nothing is retained and no account is used.
What density does the page assume?
1600 kg per cubic metre of grout, printed beneath the answer because products differ and a different density gives a different mass.
Is this a structural specification?
Every figure here is an ordering estimate, not a structural specification: it sizes a purchase, and an engineer's take-off or the manufacturer's data governs what is actually built.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.