Concrete Volume
Compute slab concrete volume, yards, and weight.
Compute slab concrete volume, yards, and weight. Enter your numbers and get an instant result.
Enter the length and width of a slab in feet and its thickness in inches, and this page reports the volume in cubic feet, the same volume in cubic yards, and an approximate weight in tons.
Cubic feet are length times width times thickness divided by 12. Cubic yards are those feet divided by 27, because a yard is three feet in each direction. Weight assumes 150 pounds per cubic foot, which is an ordinary mix rather than a specific one.
The figures are the slab's arithmetic volume. No waste allowance is added, even though the note on the page explains that concrete is usually ordered with five to ten percent extra.
The three conversions
Thickness is the only input in inches, so it is divided by 12 before multiplying. A four-inch slab over ten by ten feet is 100 square feet at a third of a foot, which is 33.33 cubic feet.
Cubic yards divide by 27, giving 1.23 for that slab. Tons multiply the cubic feet by 150 and divide by 2 000, giving 2.50.
All three figures are to two decimal places, and a zero or negative dimension blanks the panel instead of reporting a zero volume.
- Cubic feet: length * width * thickness / 12
- Cubic yards: cubic feet / 27
- Tons: cubic feet * 150 / 2000
What a supplier will add
The page's own note is the warning: order five to ten percent above the calculated volume for spillage, an uneven sub-base and grade variation. On the 1.23 yard slab that is another 0.06 to 0.12 of a yard.
A ready-mix supplier sells in part-loads and may charge for a minimum. The volume here is the material, not the delivery, and a small slab can cost more in a part-load than the concrete itself.
How to use the slab fields
Enter Length and Width in feet and Thickness in inches. Cubic feet are length times width times thickness divided by 12; cubic yards divide again by 27.
Read the Quantity Summary: cubic feet, cubic yards and tons at 150 pounds per cubic foot. No waste allowance is added, so order five to ten percent extra yourself.
What to Expect
Best for
- Sizing a garden slab or a shed base before ordering
- Converting a feet-and-inches slab into cubic yards
- Getting a rough tonnage for a trailer limit
Not ideal for
- Footings, columns or any shape that is not a rectangular slab
- A structural mix design, where the cement, aggregate and water ratio matter
- An order quantity, which needs a waste allowance added
What this tool keeps
- Feet and inches as separate units, converted once
- Cubic feet and cubic yards side by side
- Two decimal places on every figure
What may need cleanup
- The waste allowance, which the page deliberately leaves out
- The 150 pounds per cubic foot assumption, which a heavier mix exceeds
- A non-rectangular footprint, which must be split into rectangles by hand
Common errors
- Entering thickness in feet and getting a volume a thousand times too large
- Ordering exactly the cubic yards shown and running short
- Using the tonnage figure as a legal load limit rather than an estimate
Example use cases
- A 10 by 10 foot shed base at 4 inches thick
- A driveway apron measured in feet and inches
- Estimating a trailer load for a self-mix pour
Sample input
A slab 10 feet long, 10 feet wide and 4 inches thick.
Sample output
33.33 cubic feet, 1.23 cubic yards and about 2.50 tons.
Who this is for
- DIY builders preparing a slab
- Landscapers estimating a base
- Anyone converting feet and inches into cubic yards
Frequently asked questions
What does the concrete calculator report?
The volume in cubic feet, the same volume in cubic yards, and an approximate weight in tons for a rectangular slab.
Can it handle footings or a column?
No. It models a rectangular slab, so a footing, a column or an irregular shape must be split into rectangles by hand.
Does the weight include a waste allowance?
No. The page leaves the waste allowance out and assumes 150 pounds per cubic foot, which a heavier mix exceeds.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.