Square Footage Calculator screenshot

Square Footage Calculator

Square footage from length and width in feet, with a waste allowance and the metric area beside it.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Area is length times width in feet, multiplied by one plus your waste percentage, which acts as an area allowance. The answer is printed in imperial first, square feet, then metric square metres at 0.092903 per square foot.

A zero or negative length or width is refused by the field it was typed in, because a rectangle needs both. The waste allowance is printed on the answer line and named as an area allowance.

Every figure is an ordering estimate, not a structural specification, and none of it replaces an engineer's take-off. The arithmetic runs in your browser: nothing is uploaded and nothing is stored, so the same input prints the same answer on every reload.

Area is length × width in feet, multiplied by one plus your waste percentage, which acts as an area allowance; the answer prints in square feet first and then in square metres at 0.092903 per square foot. Twelve by ten feet at 10 percent therefore reads 132 ft² and 12.26 m², with the imperial figure leading.

Imperial square footage with an area allowance, and the metric area beside it.

An ordering estimate, not a structural specification.

How to use it

Enter length and width in feet and a waste percentage, then press Run. The page prints the raw area, the area with the allowance, and the metric equivalent.

Waste and units

Here the percentage is an area allowance rather than a material one, which is why the page names it that way: it covers cuts and offcuts on a floor or a wall covering. 0.092903 is the exact square foot in square metres, printed so the second line is a conversion rather than a second measurement.

Where the page stops

A zero or negative length or width is refused by the field it was typed in, because a rectangle needs both. The page takes one rectangle: an L-shaped room is two of them added by hand, and the page does not measure, does not subtract openings and does not know the shape.

What to Expect

Best for

  • Getting square footage from two dimensions in feet.
  • Seeing the metric area without converting by hand.

What this tool keeps

  • The raw and post-allowance areas print, so the allowance is visible on its own.

What may need cleanup

  • Nothing: the two areas are the whole output.

Sample input

12 ft × 10 ft, 10 percent allowance

Sample output

Area: 12 × 10 = 120 ft² With 10 percent: 132 ft² = 12.26 m²

Frequently asked questions

How do I calculate square footage?

Enter length and width in feet and a waste percentage, then press Run. The page prints square feet with the allowance and the metric equivalent.

Is anything uploaded?

No. The multiplication runs in this tab, so nothing is sent anywhere and nothing is stored.

Can I enter an L-shaped room?

Two rectangles, added by hand. The page takes one length and one width, so a broken outline has to be split before it is typed.

Is this a structural specification?

Every figure here is an ordering estimate, not a structural specification: it sizes a purchase, and an engineer's take-off or the manufacturer's data governs what is actually built.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.