Tile Area & Waste Calculator
Tile area with your waste percentage added, and the number of boxes that covers it.
Tile needed is the area multiplied by one plus your waste percentage, in metric units. Boxes are that figure divided by the coverage of one box, rounded up, because a part box still has to be bought.
A zero or negative area or box coverage is refused by name. The waste percentage is the only allowance the page adds, and it is printed on the answer line so the box count can be re-derived.
Every figure is an ordering estimate, not a structural specification, and none of it replaces an engineer's take-off. The arithmetic runs in your browser: nothing is uploaded and nothing is stored, so the same input prints the same answer on every reload.
Tile needed is the area multiplied by one plus your waste percentage, and boxes are that figure divided by the coverage of one box and rounded up, because a part box still has to be bought. Fifteen square metres at 10 percent with 1.44 m² boxes therefore reads 16.5 m² and 12 boxes, in metric units.
Metric tile area with waste, and the boxes that covers — rounded up.
An ordering estimate, not a structural specification.
How to use it
Enter the tiled area in square metres, the coverage of one box and a waste percentage, then press Run. The page prints the area with waste, the exact box count and the rounded-up number to buy.
Waste and units
The waste percentage is the only allowance the page adds, and it covers cuts at edges and breakages rather than a pattern. The division by box coverage is rounded up because tiles are bought by the box, so 11.46 boxes becomes 12 and the page prints both figures so the rounding is visible.
Where the page stops
A zero or negative area or box coverage is refused by name. A diagonal or herringbone layout wastes more than a straight one, and the page does not know your layout: it applies the percentage you type and leaves that judgement with you.
What to Expect
Best for
- Ordering tile boxes from a measured area.
- Seeing how many boxes a waste percentage adds.
What this tool keeps
- The area with waste and the exact box count print, so the rounding can be checked.
What may need cleanup
- Nothing: the area and the two counts are the whole output.
Sample input
15 m², 1.44 m² per box, 10 percent waste
Sample output
Tile needed: 15 × 1.1 = 16.5 m² Boxes: 16.5 ÷ 1.44 = 11.46 Buy: 12 boxes
Frequently asked questions
How many boxes of tile do I need?
Enter the area, the coverage of one box and a waste percentage, then press Run. The page prints the area with waste and the boxes to buy, rounded up.
Is anything uploaded?
No. The division runs in this tab, so nothing is posted, nothing is stored and no account is involved.
Why is the box count rounded up?
Because a part box still has to be bought. The exact figure prints beside the rounded one so the extra can be seen.
Is this a structural specification?
Every figure here is an ordering estimate, not a structural specification: it sizes a purchase, and an engineer's take-off or the manufacturer's data governs what is actually built.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.