Rest Timer Between Sets
Work out how long a set-by-set session takes from sets, work time and rest time.
Work plus rest, summed
Enter the number of sets, the seconds each set takes and the rest between them. The page multiplies sets by work, adds one rest for every gap, and prints the total: five sets of forty seconds with ninety seconds between them is 9 minutes 20 seconds.
There is no rest after the last set, which is what the sets-minus-one count reflects. The page does not run the session: there is no countdown and no alarm, so it cannot tell you when a rest is over. It also does not include setting up equipment, changing plates or walking between stations. A set count above 50, a work time of zero or a negative rest is refused rather than adjusted.
The sum is computed in this tab from three numbers. Nothing is uploaded, no session is stored, and the same three numbers always print the same length.
A set-by-set session length, summed: sets × work + (sets − 1) × rest, because there is no rest after the final set. Five sets of forty seconds with ninety seconds between them reads 9 min 20 s, and the page prints the multiplication so a changed set count can be re-checked at a glance. This is schedule arithmetic, not a stopwatch: nothing counts down and no clock is read. Transitions between exercises and any warm-up are outside the number. Sets and work must be above zero, while a rest of zero is allowed and simply removes the rest term.
Session length from sets × work + (sets − 1) × rest, with no rest after the last set and no clock.
How to use it
Enter the set count, the work seconds and the rest seconds, then press Run. You get the whole session in minutes and seconds plus the total in seconds, with the multiplication written out. Set rest to zero for straight sets with no planned pause.
The arithmetic
Work is multiplied by every set; rest by one fewer, since the last set ends the session. A naive sets × (work + rest) would add one extra rest, which at ninety seconds is a visible error. The sum is taken before formatting, so nothing drifts through per-set rounding.
Where it stops
Sets and work must be above zero and rest cannot be negative. The total describes the plan, not the performance: a set that ran long or a rest you cut short is not reflected. It does not include warm-up, cool-down, equipment changes, or any rest you take between exercises that is not in the rest field.
What to Expect
Best for
- Planning how long a set structure will take.
- Seeing how much each rest interval adds across a session.
What this tool keeps
- The plan's numbers are used in the browser and never transmitted; nothing is retained.
Sample input
5 sets, 40 s work, 90 s rest
Sample output
Session 9 min 20 s (560 s) 5 × 40 s work + 4 × 90 s rest — no rest after the last set.
Frequently asked questions
How do I use the rest timer?
Enter the sets, the work seconds and the rest seconds, then press Run. The page prints the total session length and the multiplication that produced it.
Is anything uploaded?
No. The sum is computed in this tab; nothing is sent, nothing is stored, and no clock runs in the background.
What are its limits?
Sets and work must be above zero, and rest cannot be negative. The result is the schedule's arithmetic — it does not time the session, and warm-up, cool-down and transitions between exercises are not counted.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.