Swimming Lap Time Calculator screenshot

Swimming Lap Time Calculator

Compute pace per 100 m, per lap and average speed from pool length, laps and a swim time.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Pool pace from laps and time

Enter the pool length, how many laps you swam and the time. A lap here is one length, one-way, so twenty laps of a fifty-metre pool is 1000 m. The page divides the total time by the distance and prints the pace per hundred metres, the time per lap and the average speed.

Only 25, 33.3 and 50 m pools are accepted, because a lap is measured against a real pool length and a guessed one would make every figure wrong. The pace is an even average: the page does not read splits from a watch, so a fast first 100 and a fading last one look the same. Seconds of 60 or more, a lap count above 200 and a zero time are refused.

The divisions run in this tab from four numbers. Nothing is uploaded, no set is stored, and the same swim always prints the same pace.

Pool arithmetic: distance = pool length × laps, and pace per 100 m is total seconds ÷ distance × 100. Twenty laps of a 50 m pool is 1000 m, so twenty minutes reads 2:00 per 100 m and 1:00 per lap, and the page prints both plus the average speed. A lap here is one length, one-way — check what your pool or watch calls a lap, because a 25 m pool counted the other way halves the distance. The page models no turns, no drafting and no rest at the wall, since all of it is inside the time you enter. Pool length, laps and time must be positive, with seconds under sixty.

Distance from pool length × laps, with pace per 100 m, per lap and average speed printed.

How to use it

Enter the pool length in metres, the number of laps and the total swim time, then press Run. The first line is the pace per 100 m; the second restates the distance, the per-lap time and the average speed. If your watch counts a lap as out-and-back, halve the number you enter or double the pool length — the distance is what matters.

The arithmetic

Distance is a single multiplication, and the pace is the total seconds over that distance scaled to a hundred metres. The per-lap time divides the same seconds by the lap count. Everything is an average of the whole swim, so a fast first 200 and a slow last 200 print as one steady pace.

Where it stops

Pool length, laps and time must all be positive and seconds must stay under sixty; negative or zero values are refused. The page takes your definition of a lap at face value and cannot detect a turn, a rest or a drafting effect. It reports arithmetic on the three numbers you supply, not a stroke analysis.

What to Expect

Best for

  • Converting a pool set into a pace per 100 m.
  • Checking a watch's lap count against the distance swum.

What this tool keeps

  • Pool length, laps and time stay in the browser; nothing is transmitted or kept.

Sample input

20 laps of a 50 m pool in 20:00

Sample output

2:00 per 100 m 1000 m in 20:00 — 20 laps of 50 m, 1:00 per lap, 3 km/h.

Frequently asked questions

How do I use the swimming lap time calculator?

Enter the pool length in metres, the laps and the total time, then press Run. You get the pace per 100 m, the per-lap time and the average speed.

Is anything uploaded?

No. The multiplications run in this tab; nothing is posted, nothing is stored, and the page works offline.

What are its limits?

Pool length, laps and time must all be positive, with seconds under 60. A lap is one length here, so a watch that counts out-and-back needs its laps halved — and turns, rests and drafting are not modelled.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.