VO2 Recovery Time Estimator screenshot

VO2 Recovery Time Estimator

Read heart-rate recovery from peak and one-minute pulse, and estimate minutes back to resting.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

The first-minute drop

Enter your peak heart rate, the rate one minute after you stopped, and your resting rate. The page subtracts for the drop and bands it: 25 bpm or more is excellent, 12 to 24 is normal and under 12 is slow. It then divides the beats still to fall by the drop for a linear estimate of the minutes back to rest.

Heart-rate recovery is a real marker, but one minute is a snapshot: hydration, heat, posture and how hard the effort was all change it, and a single reading says little. The minutes-to-rest figure is a straight-line extrapolation and the page labels it as one, because recovery actually slows as it approaches rest. A one-minute rate at or above the peak is refused, as is a resting rate at or above the one-minute reading.

The subtraction and the division run in this tab from three readings. Nothing is uploaded, no session is stored, and the same readings always print the same recovery.

Heart-rate recovery over the first minute after exercise: the drop is peak minus the one-minute rate, banded at 25 bpm or more excellent, 12 to 24 normal and under 12 slow. From a peak of 180 to 120 the drop is 60 bpm, excellent, and the page also prints a stated linear extrapolation to resting — (one-minute rate − resting) ÷ drop — which here gives one more minute. That extrapolation is arithmetic on a straight line, not a curve fit, and real recovery decelerates, so the time is an illustration rather than a prediction. Peak, one-minute and resting rates must all be above zero, the one-minute rate must be below the peak, and the resting rate below the one-minute reading.

One-minute heart-rate recovery as peak − one-minute rate, banded, with a linear extrapolation to resting printed separately.

How to use it

Enter your peak rate, the rate one minute after you stopped, and your resting rate, then press Run. The first line is the drop in bpm and its band; the second is the extrapolated minutes to rest with the division shown. A monitor that samples every five seconds is enough for the one-minute reading; a manual count immediately after stopping usually is not.

The arithmetic

The band comes from one subtraction, and the extrapolation divides the remaining fall by the first minute's rate of fall. It assumes the same bpm per minute continues until rest, which overstates the later minutes because recovery slows. The bands are conventional cut-offs from the recovery literature, not thresholds for any individual.

Where it stops

All three rates must be above zero, the one-minute rate must be below the peak and the resting rate below the one-minute reading, or the divisions have no meaning and the page refuses. The measurement depends on how hard you stopped, the ambient temperature and your position — lying down recovers faster than standing. It is a band, not a diagnosis.

What to Expect

Best for

  • Putting a number on a one-minute heart-rate recovery.
  • Seeing the drop classified against published bands.

What this tool keeps

  • The three rates stay in the browser; nothing is transmitted or retained.

Sample input

peak 180, 120 after 1 min, resting 60

Sample output

Recovery 60 bpm in the first minute — excellent Linear estimate to rest: 1 min at that rate (60 bpm still to fall ÷ 60 bpm per minute).

Frequently asked questions

How do I use the recovery calculator?

Enter your peak heart rate, the rate one minute after stopping and your resting rate, then press Run. You get the one-minute drop, its band, and a linear estimate of minutes to rest.

Is anything uploaded?

No. The subtraction and division run in this tab; nothing is sent, nothing is stored, and no clock is started.

What are its limits?

All three rates must be above zero, with the one-minute rate below the peak and rest below that. The time to rest is a straight-line extrapolation, not a curve fit, and the bands are conventional cut-offs — this is not a diagnosis.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.