Body Composition Tracker
Compare two weigh-ins and read how fat mass and lean mass changed, in kilograms.
Two weigh-ins, two compartments
Enter an earlier and a later weight, each with its own body-fat percentage. Fat mass is the weight multiplied by the percentage divided by 100, lean mass is everything left over, and the page prints both compartments at both dates with the signed change between them.
This is a two-compartment model, so bone, muscle, water and organ all sit inside the lean figure. It cannot tell whether a lean-mass change was muscle or water, and it is only as good as the body-fat reading you feed it: a bioimpedance scale and a caliper can disagree by several points. A body-fat percentage outside 1 to 60 is refused rather than trimmed into range.
The arithmetic happens in this tab from the four numbers you type. There is no account, no chart history and no upload, and the same four numbers always print the same three lines.
Two weigh-ins, each with a body-fat percentage, split into fat mass and lean mass: fat is weight × percentage ÷ 100, lean is the remainder. Between 80 kg at 25% and 78 kg at 23%, fat mass falls 2.06 kg while lean mass rises 0.06 kg and total weight falls 2 kg — the kind of detail a scale alone hides. The page reports the change in each compartment separately and never claims the lean figure is muscle, because bone, water and organ sit in the same bucket. Body-fat percentages outside 1–60 are refused as misreadings, and both weights must be above zero.
Fat and lean mass at two weigh-ins, from weight × body-fat% ÷ 100, reported as compartment-by-compartment change.
How to use it
Enter the earlier weight and body-fat percentage, then the later pair, and press Run. Three lines follow: fat mass before and after with the change, lean mass before and after with the change, and total weight at the two percentages. Enter the earlier pair first — the signs in the output are read from that order, so a reversed entry reports the change backwards.
The arithmetic
Each snapshot uses a two-compartment model: fat = weight × percentage ÷ 100, lean = weight − fat. The changes are simple subtractions, printed with an explicit plus or minus. Because the model has only two compartments, a change in hydration moves the lean figure without any tissue changing, which is why a single pair of readings is a snapshot rather than a trend.
Where it stops
Both weights must be above zero and both percentages inside 1–60 — outside that range the number is a decimal-place slip, not a reading. The arithmetic is only as good as the body-fat measurement behind it: a scale's impedance figure and a caliper reading disagree by several points, and the page has no way to tell which one it was given.
What to Expect
Best for
- Separating a weight change into fat and lean parts between two readings.
- Checking whether a cut or a bulk changed the composition or only the scale.
What this tool keeps
- Both snapshots are computed locally and never sent; the page stores nothing between visits.
Sample input
80 kg at 25% → 78 kg at 23%
Sample output
Fat mass 20 kg → 17.94 kg (−2.06 kg) Lean mass 60 kg → 60.06 kg (+0.06 kg) Total 80 kg → 78 kg (−2 kg) at 25% → 23% body fat.
Frequently asked questions
How do I use the body composition tracker?
Enter the earlier weight and fat percentage, then the later pair, and press Run. The page prints fat mass and lean mass for both readings with the signed change in each, plus the total weight change.
Is anything uploaded?
No. Both snapshots are computed in this tab; nothing is posted, no history is kept, and reloading the page removes the figures you typed.
What are the limits?
Weights must exceed zero and percentages must sit inside 1–60, or the entry is refused as a misreading. The split has two compartments, so water and bone count as lean, and the result inherits the error of whichever body-fat method produced the percentages.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.