Solubility Product (Ksp) Calculator screenshot

Solubility Product (Ksp) Calculator

Compute Ksp from a measured molar solubility and the salt's ion ratio.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Solubility product from a measured solubility

Pick the ion ratio, then enter the molar solubility in mol/L. The page evaluates Ksp = (a s)^a (b s)^b and prints the constant in scientific notation. A 1:1 salt at 1.3e-5 mol/L gives 1.69e-10.

The solubility must be above zero, because a measured solubility of zero would say the salt does not dissolve at all, which is not what a measurement gives. The five ratios offered cover the common salts; anything else is not approximated. The result is a thermodynamic constant read from one concentration, so it assumes the solution was saturated and behaved ideally.

The powers and the product are computed locally. Nothing is uploaded, and the same two inputs give the same constant after a reload.

Pick the ion ratio and enter the molar solubility in mol/L: the page evaluates Ksp = (a·s)^a·(b·s)^b and prints the constant in scientific notation. A 1:1 salt at 1.3e-5 mol/L gives 1.69e-10.

The result is a thermodynamic constant read from one concentration, so it assumes the solution was saturated and behaved ideally; a measurement made below saturation, or in a solution with a common ion, does not give this constant.

How to use it

Choose the ratio and enter the measured solubility in mol/L, then press Run. The ion concentrations are printed beside the constant, so the substitution that produced Ksp is visible rather than implied.

  • Pick the salt's ratio from the five offered.
  • Enter the measured molar solubility in mol/L.
  • Read Ksp and the ion concentrations behind it.

The arithmetic, and where it stops

Each ion's concentration is its stoichiometric coefficient times s, and Ksp is the product of those concentrations raised to their coefficients: for 1:1, (1.3e-5)² = 1.69e-10. The exponent follows the ratio, which is why a 1:2 salt cubes the same solubility instead of squaring it.

The solubility must be above zero, because a measured solubility of zero would say the salt does not dissolve at all, which no measurement gives; a zero or negative value is refused with the field named.

What to Expect

Best for

  • Deriving a solubility product from a measured solubility for a common salt type.

What this tool keeps

  • The powers and the product are computed in this tab; nothing is uploaded or kept. The same figures give the same result after a reload.

Sample input

1.3e-5, 1:1

Sample output

Ksp = 1.69e-10 [Ag+] = [Cl-] = 1.3e-5 mol/L

Frequently asked questions

How do I use the Solubility Product (Ksp) Calculator?

Choose the ratio and enter the measured solubility in mol/L, then press Run. The ion concentrations are printed beside the constant, so the substitution that produced Ksp is visible rather than implied.

Does anything leave my browser?

No. The powers and the product are computed in this tab; nothing is uploaded or kept. Reloading the page discards every value you entered.

Which inputs does it refuse?

The solubility must be above zero, because a measured solubility of zero would say the salt does not dissolve at all, which no measurement gives; a zero or negative value is refused with the field named.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.