Osmotic Pressure Calculator screenshot

Osmotic Pressure Calculator

Compute osmotic pressure with pi = iMRT using the van't Hoff factor, molarity and temperature.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Osmotic pressure from concentration

The page evaluates pi = i M R T with i the van't Hoff factor, M the molarity in mol/L, R = 8.314 LkPa/(molK) and T in kelvin. It prints the pressure in kilopascals and, beside it, the same figure in atmospheres. Two tenths of a mole of sodium chloride particles at 298.15 K come out near 496 kPa.

The van't Hoff factor and the temperature must be above zero, and a temperature of 0 K or below is refused because there is no thermal motion to drive the pressure. The molarity may be zero. The page assumes a dilute ideal solution, so a concentrated one will have a lower pressure than this.

The product is computed in the browser. Nothing is uploaded, and the same figures print the same pressure on every reload.

The page evaluates π = iMRT with i the van't Hoff factor, M the molarity in mol/L, R = 8.314 L·kPa/(mol·K) and T in kelvin, and prints the pressure in kPa with the same figure in atm beside it. Two tenths of a mole of sodium chloride particles at 298.15 K come out near 496 kPa.

The solution is assumed dilute and ideal: a concentrated one exerts less pressure than this, because solute molecules interact and the volume is no longer that of the solvent. The van't Hoff factor is your figure, not a computed one.

How to use it

Enter i, the molarity in mol/L and the temperature in kelvin, then press Run. i counts the particles one formula unit gives in solution, which is why 0.1 mol/L of sodium chloride is entered as 0.2 mol/L of particles via i = 2.

  • Enter i as particles per formula unit.
  • Enter molarity in mol/L, not molality.
  • Enter temperature in K and read kPa with atm beside it.

The arithmetic, and where it stops

Three factors multiply with the gas constant: 2 × 0.1 × 8.314 × 298.15 = 495.7 kPa. The identity with the ideal gas law is not a coincidence — osmotic pressure is the pressure the solute would exert as a gas in the same volume — which is why the same R and the same kelvin scale appear here as on the gas pages.

The van't Hoff factor and the temperature must be above zero, and a temperature of 0 K or below is refused because there is no thermal motion to drive the pressure. A molarity of zero is allowed and prints zero pressure.

What to Expect

Best for

  • Estimating the osmotic pressure of a dilute solution for a biology or lab problem.

What this tool keeps

  • The product is computed in this tab with the written-in gas constant; nothing is uploaded. The same figures give the same result after a reload.

Sample input

2, 0.1, 298.15

Sample output

π = 495.7 kPa (4.89 atm)

Frequently asked questions

How do I use the Osmotic Pressure Calculator?

Enter i, the molarity in mol/L and the temperature in kelvin, then press Run. i counts the particles one formula unit gives in solution, which is why 0.1 mol/L of sodium chloride is entered as 0.2 mol/L of particles via i = 2.

Does anything leave my browser?

No. The product is computed in this tab with the written-in gas constant; nothing is uploaded. Reloading the page discards every value you entered.

Which inputs does it refuse?

The van't Hoff factor and the temperature must be above zero, and a temperature of 0 K or below is refused because there is no thermal motion to drive the pressure. A molarity of zero is allowed and prints zero pressure.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.