Gas Moles from Volume screenshot

Gas Moles from Volume

Find the amount of gas from pressure, volume and temperature with n = PV/RT.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Moles from a measured volume

The page evaluates n = PV/(RT) with pressure in kPa, volume in litres, R = 8.314 LkPa/(molK) and temperature in kelvin. One mole at 101.325 kPa and 273.15 K occupies 22.414 litres, so 22.4 litres at those conditions comes back as 0.9994 moles.

Pressure and volume must be above zero, and a temperature of 0 K or below is refused because the formula divides by T. The gas is assumed ideal: at high pressure or near condensation the real amount differs, and the page cannot correct for that.

The calculation uses the one constant written into the page. Nothing is uploaded, and the same three numbers print the same amount of gas on every reload.

The page evaluates n = PV/RT with pressure in kPa, volume in litres, R = 8.314 L·kPa/(mol·K) and temperature in kelvin. At 101.325 kPa and 273.15 K one mole occupies 22.414 litres, so 22.4 litres comes back as 0.9994 moles.

The gas is assumed ideal, so at high pressure or near condensation the real amount differs and the page cannot correct for it. The volume must be the gas volume at the stated temperature and pressure, not at the conditions where you measured it.

How to use it

Enter pressure in kPa, volume in litres and temperature in kelvin and press Run. The result line names the amount in moles; a check line states the molar volume at your conditions so the figure can be sanity-checked against 22.414 L at STP.

  • Enter pressure in kPa.
  • Enter volume in litres, not millilitres.
  • Enter temperature in K and read the amount in mol.

The arithmetic, and where it stops

One multiplication and one division: P×V gives the pressure-volume product, and dividing by 8.314 × T converts it to moles. At STP the divisor is 2271 L·kPa/mol, which is where the familiar 22.414 L/mol comes from, and any other condition simply moves that divisor.

Pressure and volume must be above zero, since either at zero means no gas, and a temperature of 0 K or below is refused because the formula divides by T.

What to Expect

Best for

  • Converting a measured gas volume at known conditions into an amount in moles.

What this tool keeps

  • The one constant is written into the page and the division runs in this tab; nothing is uploaded. The same figures give the same result after a reload.

Sample input

101.325, 22.4, 273.15

Sample output

n = 0.9994 mol

Frequently asked questions

How do I use the Gas Moles from Volume?

Enter pressure in kPa, volume in litres and temperature in kelvin and press Run. The result line names the amount in moles; a check line states the molar volume at your conditions so the figure can be sanity-checked against 22.414 L at STP.

Does anything leave my browser?

No. The one constant is written into the page and the division runs in this tab; nothing is uploaded. Reloading the page discards every value you entered.

Which inputs does it refuse?

Pressure and volume must be above zero, since either at zero means no gas, and a temperature of 0 K or below is refused because the formula divides by T.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.