Gas Density Calculator
Compute gas density with rho = PM/RT using pressure in kPa, molar mass in g/mol and temperature in kelvin.
Gas density from the ideal gas law
The page evaluates density as pressure times molar mass divided by R times temperature, with pressure in kPa, molar mass in g/mol, R = 8.314 LkPa/(molK) and temperature in kelvin. Carbon dioxide at 101.325 kPa and 273.15 K comes out at 1.96 grams per litre.
Pressure and molar mass must be above zero. A temperature of 0 K or below is refused, because the formula divides by T and absolute zero is not a state a gas occupies. The page treats the gas as ideal, so a real gas near its condensation point will be denser than this figure.
Everything is computed from the four numbers you type. The same inputs print the same density after a reload, and no value leaves the browser.
The page evaluates ρ = PM/RT with pressure in kPa, molar mass in g/mol, R = 8.314 L·kPa/(mol·K) and temperature in kelvin, and prints the density in grams per litre. Carbon dioxide at 101.325 kPa and 273.15 K comes out at 1.96 g/L.
The gas is treated as ideal, so a real gas near its condensation point is denser than this figure and a gas at high pressure is denser still; the page does not apply a compressibility factor.
How to use it
Enter the three values and press Run. Use kPa for pressure, g/mol for molar mass and kelvin for temperature — the constant 8.314 L·kPa/(mol·K) is the one written into the page, so pressure in atm or temperature in °C gives an answer with no meaning.
- Enter pressure in kPa.
- Enter molar mass in g/mol, not kg/mol.
- Enter temperature in K and read the density in g/L.
The arithmetic, and where it stops
Density is the molar mass scaled by how many moles occupy a litre, and PV = nRT says that is P/RT. The whole calculation is one multiplication and one division by 8.314 × T: at 273.15 K the divisor is 2271, so 101.325 × 44.01 / 2271 = 1.96 g/L.
Pressure and molar mass must be above zero, and a temperature of 0 K or below is refused, because the formula divides by T and absolute zero is not a state a gas occupies.
What to Expect
Best for
- Getting an order-of-magnitude gas density for a vessel or a duct.
What this tool keeps
- The division runs in this tab with the constant written into the page; nothing is uploaded. The same figures give the same result after a reload.
Sample input
101.325, 44.01, 273.15
Sample output
ρ = 1.96 g/L
Frequently asked questions
How do I use the Gas Density Calculator?
Enter the three values and press Run. Use kPa for pressure, g/mol for molar mass and kelvin for temperature — the constant 8.314 L·kPa/(mol·K) is the one written into the page, so pressure in atm or temperature in °C gives an answer with no meaning.
Does anything leave my browser?
No. The division runs in this tab with the constant written into the page; nothing is uploaded. Reloading the page discards every value you entered.
Which inputs does it refuse?
Pressure and molar mass must be above zero, and a temperature of 0 K or below is refused, because the formula divides by T and absolute zero is not a state a gas occupies.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.