Tire Size Calculator
Compare tire sizes, overall diameter, and speedometer error.
Compare tire sizes, overall diameter, and speedometer error. Enter your numbers and get an instant result.
Compare a stock tyre size with a replacement: sidewall height, overall diameter, circumference and revolutions per mile for each.
The figures come from the size code alone, so load rating, clearance and rim width — the things that decide whether it fits — are outside the model.
How to use Tire Size Calculator
Type the factory fitment in stock_width, stock_aspect_ratio and stock_rim_diameter: width and aspect in millimetres and percent, rim in inches.
Type the candidate fitment in custom_width, custom_aspect_ratio and custom_rim_diameter using the same three units.
Read the diameter difference first: beyond roughly three percent the speedometer, gearing and clearance all move with it.
The arithmetic from the size code
Sidewall height is the width multiplied by the aspect ratio, so 205/55 gives 112.8 mm. Overall diameter adds two sidewalls to the rim diameter converted to millimetres, and circumference follows from that diameter. Revolutions per mile is the mile divided by the circumference.
The comparison then reports the difference between the two sizes, which is where a speedometer error comes from: a larger overall diameter covers more ground per revolution than the speedometer assumes.
What a size comparison cannot tell you
Nothing here measures a car. Clearance to suspension and brakes, rim width range, load index and speed rating all determine whether a size is legal and safe, and none of them is an input.
The speedometer figure is arithmetic on diameters, not a reading from the vehicle. A real error also depends on the tyre's rolling radius under load, which differs from the unloaded diameter.
What to Expect
Best for
- Comparing two tyre sizes before asking a fitter
- Understanding where a speedometer error comes from
What this tool keeps
- Both size codes as given, the derived sidewall, diameter, circumference and revolutions per mile, and the difference between them.
What may need cleanup
- Confirm fitment, load index and speed rating with a tyre specialist; the page checks none of them.
Sample input
Stock 205/55 R16 against a custom 225/45 R17.
Sample output
Stock overall diameter 631.9 mm and 810.7 revolutions per mile, custom 634.3 mm and 807.6, with the comparison stating the small diameter difference.
Frequently asked questions
Can I rely on this to choose a tyre size?
No. It compares dimensions only. Clearance, rim width, load index and speed rating decide legality and safety, and none of them is modelled.
How is the speedometer error calculated?
From the difference in overall diameter: a larger tyre travels further per revolution than the instrument assumes. Real error also depends on the rolling radius under load.
Where do the numbers come from?
From the size code you type, with fixed conversions. No vehicle, catalogue or manufacturer data is read.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.