Thermal Conductivity Calculator screenshot

Thermal Conductivity Calculator

Compute the steady heat flow through a flat slab with Fourier's law, in watts, plus the energy moved in one hour.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Fourier's law through a slab

Enter the material's thermal conductivity in W/(m·K), the area in square metres, the temperature difference across the slab in kelvin and its thickness in metres. The page evaluates Q/t = k·A·ΔT / d and prints the heat flow in watts, then the energy moved in one hour as P × 3.6 in kilojoules. Glass wool at 0.8 W/(m·K) over 1 m² with 20 K across 0.1 m passes 160 W.

The slab is flat, homogeneous and in a steady state, with one face held at each temperature and no convection on either side. A real wall adds surface films, framing that bridges the insulation, and a transient warm-up the page does not model, so a building figure computed here is an order-of-magnitude check rather than a specification. A zero thickness or zero area is refused rather than divided by.

The multiplication runs in this tab from the four values you enter. Nothing is uploaded, no material is stored, and the same inputs print the same wattage after a reload.

Fourier’s law for a flat slab: Q/t = k·A·ΔT / d, with k in W/(m·K), area in m², temperature difference in kelvin and thickness in metres. Glass wool at 0.8 W/(m·K) over 1 m² with 20 K across 0.1 m passes 160 W, and the page also prints the energy moved in an hour.

The slab is homogeneous and in a steady state, with no surface films and no convection. A real wall adds framing bridges and a transient warm-up, so this is an order-of-magnitude check rather than a specification.

How to use it

Enter the conductivity, the area, the temperature difference and the thickness, then press Run. The heat flow in watts comes first, the multiplication comes second, and the energy moved in one hour is printed in kilojoules.

The arithmetic

Conductivity, area and temperature difference are multiplied together and divided by thickness. The hourly energy is the resulting power multiplied by 3.6, which converts watt-seconds to kilojoules without a second unit table.

Where it stops

Steady state is assumed: a wall warming up from cold moves a different amount at first. Surface films on both faces, thermal bridging by framing, and moisture in the insulation all change the real figure. A zero thickness or zero area is refused rather than divided by.

What to Expect

Best for

  • Comparing two insulation materials.
  • A first estimate of heat flow through a panel.

What this tool keeps

  • The four values are computed in the browser and never posted, so the page works offline and retains nothing.

Sample input

k = 0.8 W/(m·K), 1 m², 20 K, 0.1 m

Sample output

Q/t = 160 W Q/t = k·A·ΔT / d = 0.8 × 1 × 20 / 0.1 Energy in one hour = 576 kJ

Frequently asked questions

How do I use it?

Type the conductivity, area, temperature difference and thickness, then press Run. The heat flow and the energy moved in one hour are printed with the multiplication shown.

Is anything uploaded?

No. The arithmetic runs in this tab with JavaScript: no request is made, no account is needed, nothing is stored, and the page keeps working offline once loaded.

What are its limits?

The slab must be flat, homogeneous and in a steady state; surface films, thermal bridging and moisture are not included, so a building figure must be treated as an estimate.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.