Speed to Watt Conversion (Cycling)
Estimate steady-state cycling power from speed, total mass and gradient with the road-load equation.
Power at the wheel is speed times the sum of three forces: rolling resistance Crr times mass times g, the climbing term mass times g times gradient, and aerodynamic drag of half rho times CdA times speed squared. Crr is 0.005, g 9.81, rho 1.225 and CdA 0.32.
Mass and speed must be above 0 and the gradient within −30 to 30 percent; anything outside is refused rather than silently flattened. The model is steady state: no acceleration, no wind, no drivetrain loss and no change in rolling resistance.
Every constant is printed beside the result, so the estimate can be recomputed by hand with a different CdA or Crr.
Power at the wheel is P = v × (Crr·m·g + m·g·grade + ½·ρ·CdA·v²), with rolling resistance 0.005, gravity 9.81 m/s², air density 1.225 kg/m³ and frontal area 0.32 m². The three force terms and the speed in m/s are all printed so the estimate can be checked.
It is a steady-state estimate: no acceleration, no wind, no drivetrain loss. A gradient beyond ±30% is refused because the model stops being a road-load model there, not because the arithmetic fails.
How to use it
Enter the rider-plus-bike mass in kilograms, the speed in km/h and the gradient in percent (0 for flat), then press Run. The output is the estimated watts at the wheel, the three force terms and the constants used.
The arithmetic
Speed is converted to m/s by dividing by 3.6. Rolling and climbing forces are constant for a given mass and grade; the aero term grows with the square of speed, which is why the last few km/h cost so much.
What to Expect
Best for
- Seeing roughly what a speed and gradient imply for power, and how the three forces split.
What this tool keeps
- The watt estimate, the rolling, climbing and aero terms, and the constants.
Sample input
80 kg rider and bike, 30 km/h, 0% gradient.
Sample output
Estimated power = 146 W at the wheel P = v × (Crr·m·g + m·g·grade + ½·ρ·CdA·v²): 0.005 × 80 × 9.81 = 3.92, grade term 0.00, aero 13.61 N v = 8.33 m/s, ρ 1.225 kg/m³, CdA 0.32 m², no wind or acceleration
Frequently asked questions
Is this the power I need to produce?
It is power at the wheel, before drivetrain loss, so a rider's measured power at the cranks would be a few percent higher. The output says 'at the wheel' for that reason.
Why is wind not included?
There is no wind field: the model is steady-state in still air. A headwind is equivalent to a higher airspeed, which this page cannot infer from a ground speed.
What happens at a steep gradient?
Anything past ±30% is refused, because the steady-state road-load model is outside its useful range there. Enter a gradient within that band.
Is any ride data uploaded?
No. Mass, speed and gradient are typed, the formula runs in this tab and nothing is sent.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.