Process Capability Calculator screenshot

Process Capability Calculator

Cp and Cpk from the specification limits, plus the expected ppm outside them from the normal CDF.

Privacy First
0 Runs
Updated 2026-11-22
Runs in your browser
No sign-up, no upload
Exact where arithmetic allows

Process Capability Calculator

Cp and Cpk from the specification limits, plus the expected ppm outside them from the normal CDF.

What the page prints, and what it refuses

Every figure is printed with the rule or formula that produced it, and any numerical tolerance is stated on the result rather than implied. The page refuses an input the formula does not define and names the value it read; it prints no answer it cannot support.

The calculation runs entirely in this browser tab; nothing is uploaded.

The page compares a process spread with its specification. Limits of 9.8 and 10.2, a mean of 10.05 and a sigma of 0.05 give Cp = 1.3333 and Cpk = 1, because the mean sits closer to the upper limit.

It also converts that gap into an expected out-of-spec share: 1349.97 ppm above the upper limit and 0.29 ppm below the lower one. That is a model-based estimate from the normal distribution, and the page labels it as such.

Cp versus Cpk

Cp = (USL − LSL) ÷ 6σ measures the spread alone. Cpk = min((USL − μ)/3σ, (μ − LSL)/3σ) also charges for being off-centre, so it can never exceed Cp and equals it only when the mean is centred.

The out-of-spec share is 1 − Φ((USL − μ)/σ) plus Φ((LSL − μ)/σ), in ppm. It assumes the process is normal and stable; the page prints no sigma-level quality band, because those bands are conventions rather than arithmetic.

How to use Process Capability Calculator

Enter the upper and lower specification limits, the process mean and its standard deviation, then press Run.

The result prints Cp, Cpk, both one-sided indices and the expected ppm above, below and in total.

What to Expect

Best for

  • Checking whether a process fits its tolerance
  • Seeing how an off-centre mean costs capability
  • Converting a capability index into an expected defect share

Not ideal for

  • A non-normal process, where the ppm estimate is wrong
  • A process that is not in statistical control
  • A sigma-level band, which the page deliberately does not assign

What this tool keeps

  • All four inputs exactly as typed

What may need cleanup

  • Nothing: the indices and ppm are final numbers

Common errors

  • An upper limit below the lower is refused
  • A zero standard deviation is refused

Example use cases

  • Compute Cp and Cpk for 9.8 to 10.2
  • See Cpk fall when the mean shifts
  • Estimate a defect share in ppm

Sample input

USL 10.2, LSL 9.8, mean 10.05, sigma 0.05

Sample output

Cp = 1.333333, Cpk = 1, 1349.97 ppm above and 0.29 ppm below

Who this is for

  • Quality engineers
  • Students learning capability indices

Frequently asked questions

Why is Cpk lower than Cp?

The mean is 10.05, which is not halfway between 9.8 and 10.2. Cpk charges for that offset, while Cp measures only the width of the spread.

What does 1349.97 ppm mean?

About 0.135 % of output is expected above the upper limit under the normal model. It is an estimate from the stated mean and sigma, not a count of observed defects.

Is there a required Cpk?

That is a contract or industry convention, so the page assigns none. It prints the index and the expected share, and the reader supplies the target.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.