Screen Caliper screenshot

Screen Caliper

Turn a pixel distance measured on screen into millimetres and inches from your panel's resolution and diagonal.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

Pixels into millimetres

Measure a distance on screen in pixels, then give the panel's resolution and diagonal. The page computes the pixel density as the diagonal in pixels divided by the diagonal in inches, and converts the distance with millimetres = pixels ÷ ppi × 25.4. On a 1920 × 1080 panel with a 15.6 inch diagonal, 420 px prints as 75.546 mm at 141.212 ppi.

The answer is only as good as the figures typed. A browser does not report a screen's physical size, so the page asks for the diagonal and states that the result assumes the panel really is that size; scaling, overscan and a non-square pixel grid all move the true value. A zero or negative resolution or diagonal is refused, because the density would divide by zero.

The arithmetic runs in this tab from the four values you type. Nothing is uploaded, no screen is probed, and the same figures print the same length after a reload.

The page turns a pixel distance measured on screen into millimetres and inches, using the panel figures you supply: density is the diagonal in pixels divided by the diagonal in inches, and length is pixels ÷ ppi × 25.4. On a 1920 × 1080 panel at 15.6 inches, 420 px prints as 75.546 mm at 141.212 ppi. The answer assumes the diagonal you typed really is the panel size.

Pixels into millimetres, from your own screen figures.

How to use it

Measure the distance in pixels, then enter the screen width, height and diagonal in inches and press Run. The length is printed in millimetres and inches with the pixel density beside it.

What it will not do

A browser does not report a screen's physical size, so the page asks for the diagonal and states that every result depends on it; display scaling, overscan and a non-square pixel grid all move the true length. A zero or negative resolution or diagonal is refused, because the density would divide by zero.

What to Expect

Best for

  • Translating an on-screen measurement into a physical one for a design or a print check.

What this tool keeps

  • The conversion runs in this tab from the four values you typed; nothing is uploaded and no screen is probed.

Sample input

420 px on 1920 × 1080 at 15.6 in

Sample output

420 px = 75.546 mm 420 px = 2.9743 in at 141.212 ppi Screen: 1920 × 1080 on a 15.6 in diagonal.

Frequently asked questions

How do I use the screen caliper?

Fill in the fields above and press Run. Measure the distance in pixels, then enter the screen width, height and diagonal in inches and press Run. The length is printed in millimetres and inches with the pixel density beside it.

Is my input uploaded?

No. Every figure is computed in this tab with JavaScript. Nothing is posted to a server, nothing is stored, and the page keeps working offline once it has loaded.

What are the limits?

Width, height and diagonal must each be above zero and the pixel distance must not be negative; a zero resolution or diagonal is refused with the field named.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.