Microphone Test screenshot

Microphone Test

Check that the browser can open your microphone and watch its level in dBFS, with permission denied and no device reported as named states.

Privacy First
0 Runs
Updated 2026-11-22
Stream stays in the tab
No recording, no upload
Named refusal states

Microphone Test

Check that the browser can open your microphone and watch its level in dBFS, with permission denied and no device reported as named states.

What the page does

The microphone is opened only when you press Start. The stream is connected to an AnalyserNode in this tab, and the level is the root-mean-square of one buffer, converted to dBFS.

Stop ends every track and closes the audio context. The page says what it cannot do: it cannot tell a good microphone from a poor one, and it does not record anything.

The page runs entirely in this browser tab; nothing is uploaded.

Press Start microphone and the browser asks for permission. Once a stream is open, the meter follows the level the analyser measures and the panel reports the current level in dBFS, the peak since the stream opened and the sample rate.

The audio is analysed in this tab and never leaves it: there is no recording, no upload and no file. If permission is denied or no device answers, the page names that state instead of failing silently.

How to use Microphone Test

Press Start microphone and allow the permission prompt. The note changes to "live" and the meter starts moving when there is sound.

Speak or play a steady sound and watch the level and peak. Press Stop microphone to close the stream; press Reset to clear the readings after the stream is closed.

What the level actually measures

The analyser returns the waveform of the last buffer, and the page takes the root mean square of it. That is a measure of signal amplitude, not loudness in any perceptual sense, and it is converted to dBFS where zero is the largest value the converter can represent.

Because it is amplitude, a quiet room and a silent input are not the same reading: a silent input sits at the noise floor of the converter, which is why the page prints −100 dBFS for exact zero rather than infinity. Speech usually sits well above −40 dBFS; a reading that never moves is the interesting result, because it means the browser is delivering silence.

What to Expect

Best for

  • Checking that a microphone is connected
  • Seeing whether the browser delivers any signal
  • Finding which input a browser selected

Not ideal for

  • Judging recording quality
  • Measuring room acoustics, which needs a calibrated chain
  • Recording audio, which this page does not do

What this tool keeps

  • Nothing: no sample is stored, only the current level

What may need cleanup

  • Nothing: Stop closes the stream

Common errors

  • A denied permission is a state, not a failure of the page
  • An insecure page (http) exposes no microphone at all

Example use cases

  • Check a headset before a call
  • See whether the browser picked the right input
  • Watch the level while adjusting input gain

Sample input

A steady spoken sentence with the default microphone

Sample output

A level around −22 dBFS with a peak of −9 dBFS at 48,000 Hz

Who this is for

  • Anyone checking a microphone
  • Readers debugging a call setup

Frequently asked questions

Is my audio recorded or uploaded?

No. The stream goes to an AnalyserNode in this page and the level is computed from one buffer at a time. There is no recording, no file and no request; Stop closes every track.

What does "denied" mean?

The browser refused the microphone request, usually because the permission was declined or blocked for the site. Nothing was opened, and the page keeps that as a named state so you know the difference between a refusal and a broken device.

Why does the level stay at −100 dBFS?

Because the analyser received exact zeros. That is silence as the browser delivered it, which can mean a muted input, a wrong device or a muted system setting rather than a quiet room.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.