Logarithmic Growth Calculator screenshot

Logarithmic Growth Calculator

Derive the continuous growth rate from two measurements, with the doubling time and a prediction at another time from the same fitted curve.

Privacy First
0 Runs
Updated 2026-11-22
Runs in your browser
No sign-up, no upload
Fit verified against the data

Logarithmic Growth Calculator

Derive the continuous growth rate from two measurements, with the doubling time and a prediction at another time from the same fitted curve.

How this page computes

The rate is (ln y₂ − ln y₁) / (t₂ − t₁), computed directly, and e^k − 1 converts it to a per-unit percent. The doubling time is ln 2 / k when k is positive.

A prediction evaluates y₁ · e^(k(t − t₁)). The check recomputes y₂ the same way, which is why it must reproduce the input for the model to be consistent.

The calculation runs entirely in this browser tab; nothing is uploaded.

Two measurements fix an exponential curve, and the page reports its continuous rate. Going from 100 to 400 in ten time units is a factor of four, so k = ln 4 / 10 = 0.1386294361, which is about 14.87% growth per time unit.

The doubling time falls straight out of that rate — 5 time units here — and a predicted value at a third time is printed from the same curve. The check recomputes the second measurement from the first and the rate, so the fit is verified rather than declared.

How to use Logarithmic Growth Calculator

Enter both measurements and their times, and optionally a time to predict at, then press Run. Both measurements must be above zero, because a logarithm of a non-positive value is not real.

The output gives the ratio, the elapsed time, the continuous rate, the equivalent per-unit percent, the doubling time and the prediction. Two measurements at the same time are refused, since the rate would divide by zero.

Why a straight line in the logarithm is an exponential

Take the natural logarithm of both measurements. A quantity growing exponentially at rate k has ln y = ln y₁ + k(t − t₁), so the logarithm is linear in time and k is the slope between the two logarithm values.

That slope is the whole model: e^(k · dt) multiplies the first measurement into the second by construction. The page then reads the slope back as an exponential, so the prediction at a third time is on the same curve rather than extrapolated by a separate rule.

What to Expect

Best for

  • The growth rate implied by two measurements
  • A doubling time from two data points
  • A prediction at another time on the same curve

Not ideal for

  • Noisy data with more than two points, which needs a regression
  • A measurement at or below zero, which has no real logarithm
  • A quantity that is not exponential, where the rate is an average and not a model

What this tool keeps

  • Both measurements and both times exactly as typed

What may need cleanup

  • Nothing: the rate and the check agree by construction

Common errors

  • A non-positive measurement is refused
  • Two equal times are refused with the reason
  • A non-numeric input is refused by name

Example use cases

  • Find the rate from 100 at t = 0 to 400 at t = 10
  • Get the doubling time for that rate
  • Predict the value at t = 20

Sample input

100 at t = 0, 400 at t = 10, predict at t = 20

Sample output

k = 0.1386294361, doubling time 5, prediction 1600

Who this is for

  • Students fitting an exponential
  • Readers checking a growth claim

Frequently asked questions

Why use the logarithm?

Because an exponential becomes a straight line when you take logs, and the slope of a straight line is easy to read. The rate is that slope, and the page prints it in both continuous and per-unit percent form.

What does the check do?

It recomputes the second measurement from the first and the rate. If the fit were wrong the recomputed value would differ from what you typed, so the agreement is evidence rather than decoration.

Can the rate be negative?

Yes, when the second measurement is smaller. The rate is then negative, the doubling time is not defined, and the page prints a halving note instead of a doubling time.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.