Linear Expansion Calculator
Find how much a metal or glass rod grows or shrinks over a temperature change, using the material's coefficient of linear expansion.
ΔL = α·L₀·ΔT
Choose a material from the table — aluminium 23×10⁻⁶/K, copper 17×10⁻⁶/K, brass 19×10⁻⁶/K, steel 12×10⁻⁶/K, soda-lime glass 9×10⁻⁶/K and invar 1.2×10⁻⁶/K — then enter the original length and the temperature change. The coefficients are mean values at 20 °C from standard engineering tables (CRC Handbook, 97th edition). The page evaluates ΔL = α·L₀·ΔT and prints the change in millimetres and the new length.
The formula is one-dimensional and linear: it assumes the coefficient is constant across the whole range, which is an approximation that drifts as the temperature rises. It does not model a composite bar, a constrained part that cannot expand and therefore builds stress, or a phase change. A negative temperature change is cooling and is allowed; a length of zero is refused.
The arithmetic runs in this tab from the values you pick. Nothing is uploaded, no measurement is stored, and the same inputs print the same growth after a reload.
Linear thermal expansion of a solid: ΔL = α·L₀·ΔT, using mean coefficients at 20 °C from standard engineering tables — aluminium 23×10⁻⁶/K, copper 17×10⁻⁶/K, brass 19×10⁻⁶/K, steel 12×10⁻⁶/K, soda-lime glass 9×10⁻⁶/K, invar 1.2×10⁻⁶/K.
One metre of aluminium over 50 K grows 1.15 mm. The formula is one-dimensional and linear, so it does not describe a constrained part that builds stress, a composite bar or a phase change.
How to use it
Pick a material, enter the original length in metres and the temperature change in kelvin, then press Run. The page prints the growth in millimetres, the multiplication with the coefficient, and the new length with the material named.
The arithmetic
The chosen coefficient is multiplied by the original length and the temperature change. A cooling is a negative change, and the sign of the answer follows it, so a rod that shrinks prints a negative growth rather than an absolute value. The new length is the original plus that change.
Where it stops
The coefficient is treated as constant across the whole range, which is an approximation that drifts as the temperature rises. A part held rigid at both ends cannot expand and builds stress instead; a composite of two materials bends. A length of zero is refused because a rod of no length expands by nothing.
What to Expect
Best for
- Checking a thermal allowance on a rail or a pipe.
- Comparing two materials over the same range.
What this tool keeps
- The dimensions and temperature change are computed in the browser and never posted, so the page works offline and retains nothing.
Sample input
Aluminium, 1 m, 50 K
Sample output
ΔL = 1.15 mm ΔL = α·L₀·ΔT = 2.3e-5 /K × 1 m × 50 K New length = 1.00115 m (aluminium, α = 2.3e-5 /K)
Frequently asked questions
How do I use it?
Pick a material, type the original length in metres and the temperature change in kelvin, then press Run. The change in millimetres and the new length are printed together.
Is anything uploaded?
No. The arithmetic runs in this tab with JavaScript: no request is made, no account is needed, nothing is stored, and the page keeps working offline once loaded.
What are its limits?
The coefficient must be the tabulated mean at 20 °C and the expansion is treated as linear: a constrained part, a composite or a phase change must not be read from this figure.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.