Feet to Meters
Convert feet to meters in your browser: 1 ft is 0.3048 m.
What this Feet to Meters does
One feet is exactly 0.3048 m — the page multiplies by the factor, it does not estimate.
1 1 ft = 0.3048 m (1959 international yard and pound: one foot is exactly 0.3048 metres). The page multiplies the value by the from-unit factor in m and divides by the to-unit factor. The result prints to six decimal places with trailing zeros trimmed, and the same unit in both selects returns the value unchanged.
Neighbour table
| ft | m |
|---|---|
| 1 | 0.3048 |
| 2 | 0.6096 |
| 5 | 1.524 |
| 10 | 3.048 |
Rounding
Six decimal places, trailing zeros trimmed: 1 ft prints as 0.3048 m. The table above is computed from the same factor, not typed in.
What it refuses
A blank box, anything that is not a number, and any unit from another dimension — a weight like kilograms or a temperature like Celsius. A refusal names the fix instead of guessing.
How to use it
Feet to Meters: paste the value into the box above, set From unit (default "ft") and To unit (default "m"), and press Run to get the converted meters below.
Worked example
Input:
1
Output:
0.3048
Why it runs in your browser
The conversion happens on this page with JavaScript. Your input is not posted to a server, so it works offline after the page loads and nothing is retained anywhere. The page reads value and returns converted meters; reloading the page discards both.
One feet is exactly 0.3048 m — the page multiplies by the factor, it does not estimate.
1 ft = 0.3048 m (1959 international yard and pound: one foot is exactly 0.3048 metres). The page multiplies the value by the from-unit factor in m and divides by the to-unit factor.
The page runs entirely in the browser: nothing is posted, stored or timed.
Exact factor, stated once
1959 international yard and pound: one foot is exactly 0.3048 metres. Results print to six decimal places with trailing zeros trimmed, so the neighbour table below is computed from the factor, not typed in.
Picking the same unit in both selects returns the value unchanged, which is the identity the round trip is measured against.
- ft to m: 1 ft = 0.3048 m
- Six decimal places, trailing zeros trimmed
- Same unit in both selects returns the value unchanged
How to use this converter
Paste the value, set From unit to ft and To unit to m, and press Run. The converted meters appears below with its factor, so the answer is checkable.
A blank box, a non-number, or a unit from another dimension is refused with the fix named: a weight like kilograms or a temperature like Celsius.
What to Expect
Best for
- Turning feet into meters without reaching for a calculator
- Checking a length figure against its exact factor
Not ideal for
- Converting a different dimension — a weight like kilograms or a temperature like Celsius
- Replacing the domain page that owns the whole length table
What this tool keeps
- The exact factor: 1 ft = 0.3048 m
- The value unchanged when both selects name ft
What may need cleanup
- Six places can hide a seventh that matters for machining tolerances
- A pasted value with a unit suffix ("ft") is refused, not stripped
Common errors
- Typing the unit into the value box instead of the selects
- Reading the reverse direction off this page instead of Meters to Feet
Example use cases
- Converting feet to meters for a trip, a recipe or a bill
- Double-checking a conversion quoted without its factor
Sample input
Enter 1 (1 ft converts to 0.3048 m).
Sample output
0.3048 m, at six decimal places.
Who this is for
- Anyone converting feet to meters once
- Anyone checking a length number against its definition
Frequently asked questions
What is the exact factor?
1 ft is 0.3048 m (1959 international yard and pound: one foot is exactly 0.3048 metres). The reverse page shows the reciprocal to the same six places.
Does the page convert the other way too?
Yes — Meters to Feet converts m back to ft, and the two agree: 1 ft goes to 0.3048 m and back to 1 ft.
What if I pick a unit from another dimension?
The page only converts length, so a weight like kilograms or a temperature like Celsius is refused with both dimensions named instead of guessed.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.