Brine and Salinity Calculator
One salt mass with both readings — salt as a percentage of the water and as a percentage of the finished brine.
What the brine and salinity calculator does
It converts between the two ways a brine recipe is written. When the salinity is a percentage of the water, salt = water × salinity ÷ 100. When it is a percentage of the finished brine, salt = water × salinity ÷ (100 − salinity). Both readings of the answer are printed, so a recipe written the other way can be matched without re-deriving it.
1000 g of water at 5 % of the water is 50 g of salt in 1050 g of brine, which is 4.7619 % of the total. The same 1000 g at 5 % of the total is 52.6316 g of salt, which is 5.2632 % of the water. The gap is small at weak brines and grows with strength, which is why the page prints both rather than choosing one.
A gram of water is treated as a millilitre and the page says so. The water mass is taken from 1 to 100 000 g and the salinity from 0.1 to 30 %; a zero or negative water mass, a salinity outside that range and an unknown basis are refused by name.
This is concentration arithmetic. It is not a curing guide, it makes no food-safety claim, and it does not choose a brine strength for any ingredient.
Figures print to up to four decimal places with trailing zeros trimmed.
How to use it
Enter the Water mass in grams.
Enter the Salinity and choose the Salinity basis the recipe uses: a percentage of the water or of the finished brine.
Press Run. The result prints the salt mass, the total and both readings.
Worked example
Input with the defaults:
1000 g water, 5 %, salt as % of water
Output:
Salt: 50 g
Total: 1050 g
Of water: 5 %
Of total: 4.7619 %
Why it runs in your browser
The one division and the two readings run in this tab. Your quantities are never uploaded.
It converts between the two ways a brine recipe is written: salt as a percentage of the water, and salt as a percentage of the finished brine. The salt mass is computed under the basis you choose and both readings are printed.
1000 g of water at 5 % of the water is 50 g of salt in 1050 g of brine, which is 4.7619 % of the total; the same water at 5 % of the total is 52.6316 g of salt.
The gap is small at weak brines and grows with strength, which is why the page prints both readings rather than choosing one for you.
Salt-to-water and salt-to-total
Salt as a percentage of the water is salt ÷ water × 100. Salt as a percentage of the finished brine is salt ÷ (water + salt) × 100. They answer different questions and differ by a few percent at brine strength, so a recipe written one way and read the other is a different brine.
The page solves for the salt mass in the direction you name: water × salinity ÷ 100 for the water basis, and water × salinity ÷ (100 − salinity) for the total basis. The other reading is then printed so the two can be matched.
What this page does not decide
It is concentration arithmetic. It does not choose a brine strength, it does not know an ingredient, and it makes no curing or food-safety claim; those are separate questions with their own sources, and a calculator that implied one would be claiming more than it can support.
A gram of water is treated as a millilitre and the page says so. The water mass is taken from 1 to 100 000 g and the salinity from 0.1 to 30 %, and a value outside either range is refused by name.
How to use Brine and Salinity Calculator
Enter the Water mass in grams.
Enter the Salinity and choose the Salinity basis the recipe uses: a percentage of the water or of the finished brine.
Press Run. The result prints the salt mass, the total and both readings.
What to Expect
Best for
- Matching a brine recipe written on the other basis
- Computing a salt mass from a stated salinity
- Checking a brine's two readings before mixing
Not ideal for
- Choosing a brine strength for an ingredient
- Curing or preservation guidance, which this page does not give
- A brine measured by volume of salt, which is a different unit
What this tool keeps
- The water mass, the salinity and the basis
- The salt mass, the total and both percentage readings
What may need cleanup
- A recipe that measures salt in cups, which has to become grams
- A water volume in litres, which is the same number in kilograms
Common errors
- Reading a salt-to-water percentage as salt-to-total
- Forgetting that the total includes the salt's own mass
Example use cases
- Converting a 5 % brine between the two conventions
- Checking a recipe's salt mass against a scale
- Writing a brine down in both readings
Sample input
1000 g of water at 5 %, salt as a percentage of the water.
Sample output
50 g of salt in 1050 g of brine, which is 5 % of the water and 4.7619 % of the total.
Who this is for
- A cook converting a brine recipe between conventions
- Anyone checking a salt mass before mixing
Frequently asked questions
Why do the two percentages differ?
Because they divide by different things. Salt ÷ water is larger than salt ÷ (water + salt) at the same salt mass, and the difference grows with the salinity: at 5 % it is about a quarter of a point, at 20 % it is several points.
Which basis do brine recipes usually mean?
Both are in use and a recipe rarely says which, which is why the page prints both readings. The basis you select decides which number the salinity field is read as; the other reading is the one a differently written recipe would state.
Does this tell me whether a brine is safe?
No. The page computes a concentration and makes no curing or food-safety claim. Preservation depends on the ingredient, the temperature and the time, which are not on this page.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.