Average Blood Glucose from HbA1c
Convert IFCC HbA1c to NGSP percent and estimate average blood glucose in mg/dL and mmol/L.
IFCC HbA1c to average glucose
Enter HbA1c in IFCC mmol/mol. The page converts to NGSP percent with NGSP = 0.09148 × IFCC + 2.152, then estimates average glucose as 28.7 × NGSP − 46.7 mg/dL and divides by 18.0182 for mmol/L.
Two different regressions are chained here, so the result is an estimate from a population fit, not a measurement of any one person. Values above 200 mmol/mol are refused as outside the IFCC scale. This is arithmetic aid for a qualified reader, not a diagnosis or medical advice.
Both conversions are closed-form arithmetic on the value you type. Reload the page, type the same number, and the same two figures appear; nothing is transmitted or kept.
The page converts an IFCC HbA1c in mmol/mol to the NGSP percent scale with NGSP = 0.09148 × IFCC + 2.152, then applies the ADAG regression eAG = 28.7 × NGSP% − 46.7 to get average glucose in mg/dL, and divides by 18.0182 for mmol/L. Both the intermediate percentage and both glucose figures are printed.
It converts between two ways of writing the same HbA1c and then applies one published regression; it does not estimate a glucose value from anything else on the page.
How to use it
Enter the HbA1c in IFCC mmol/mol and press Run. The output prints the average glucose in mg/dL and in mmol/L, the NGSP percentage the master equation produced, and the two substitutions. Anything above 200 mmol/mol is refused as outside the scale the equation is defined on.
The arithmetic
53 mmol/mol becomes 0.09148 × 53 + 2.152 = 7.0004 %, and 28.7 × 7.0004 − 46.7 = 154.2126 mg/dL, which is 8.5587 mmol/L at 18.0182 mg/dL per mmol/L. The intermediate percentage is printed because the two conversions are separate steps: one changes the scale of the HbA1c, the other turns a percentage into a glucose.
Where the page stops
The ADAG regression has a floor: below about 1.63 % HbA1c the line reaches zero glucose, so smaller inputs are refused rather than printed as a negative concentration. The page also refuses IFCC values above 200 mmol/mol. It does not compare either glucose figure with a target.
What to Expect
Best for
- Converting an IFCC HbA1c into the two glucose units the ADAG regression defines.
What this tool keeps
- Both glucose units and the intermediate NGSP percentage are printed together.
What may need cleanup
- Nothing: the conversion is total and the printed lines can be copied as they are.
Sample input
53 mmol/mol
Sample output
Average glucose = 154.2126 mg/dL = 8.5587 mmol/L NGSP HbA1c = 0.09148 × 53 + 2.152 = 7.0004 % eAG = 28.7 × 7.0004 − 46.7 = 154.2126 mg/dL ÷ 18.0182 = 8.5587 mmol/L
Frequently asked questions
How do I use the average blood glucose calculator?
Enter the HbA1c in IFCC mmol/mol — the number your lab reports alongside or instead of a percentage — and press Run. The output gives the average glucose in mg/dL and mmol/L, with the NGSP percentage it passed through.
Is anything uploaded when I press Run?
No. The arithmetic runs in this tab with JavaScript: nothing is posted to a server, nothing is stored, and reloading the page discards both the input and the result.
Why is my HbA1c refused as too large?
The IFCC scale this equation is written for ends at 200 mmol/mol, so a larger number would be extrapolated past the range the master equation and the ADAG regression were fitted on. The page names the bound instead of computing beyond it.
Is this a diagnosis or medical advice?
No. It is an arithmetic aid for a qualified reader: the page prints the formula's output and the numbers behind it, and leaves interpretation, and any decision taken from it, to someone qualified to make it. It is not a diagnosis and not medical advice.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.