Aquarium Heater Wattage Calculator screenshot

Aquarium Heater Wattage Calculator

Tank volume from its dimensions in litres and gallons, and the heater wattage at the watts per litre you set.

Privacy First
0 Runs
Updated 2026-11-21
Runs in your browser
No sign-up, no upload

What the aquarium heater wattage calculator does

It computes a tank's volume from its inside dimensions and multiplies it by the watts per litre you set. Volume = length × width × height ÷ 1000, which gives litres because 1000 cm³ is one litre; watts = volume × the rate. A 60 × 30 × 40 cm tank is 72 L, or 19.0204 US gallons, and 72 W at 1 W per litre.

The rate is yours because heater sizing also depends on the room's temperature and the rise you want, which this page cannot see: a tank in a cold room needs more than the same tank in a warm one. The page supplies no manufacturer's specification and does not pick a heater.

The three dimensions are taken from 5 to 500 cm and the rate from 0.1 to 10 W per litre. A zero dimension, a rate outside the range and a non-numeric figure are refused by name. The volume is the tank's inside volume; glass thickness, substrate, rock and equipment displace water, so the figure is the box, not the water.

Figures print to up to four decimal places with trailing zeros trimmed.

How to use it

Set Tank length, Tank width and Tank height to the inside dimensions in centimetres.

Set Watts per litre to the figure you are sizing to.

Press Run. The result prints the volume in litres and gallons and the heater wattage.

Worked example

Input with the defaults:

60 × 30 × 40 cm, 1 W per litre

Output:

Volume:     72 L (19.0204 US gallons)
Rate:       1 W per litre (yours)
Heater:     72 W

Why it runs in your browser

The volume and the wattage are computed in this tab. Your tank is never uploaded.

It computes the volume of a tank from its inside dimensions and multiplies it by the watts per litre you set. Volume = length × width × height ÷ 1000, and watts = volume × the rate.

A 60 × 30 × 40 cm tank is 72 L, or 19.0204 US gallons, and 72 W at 1 W per litre.

Heater sizing also depends on the room's temperature and the rise you want, which the page cannot see, so the rate is yours and the page supplies no manufacturer's specification.

Volume from dimensions

One litre is 1000 cm³, so a tank's inside volume in litres is length × width × height ÷ 1000. The page also prints the volume in US gallons, because heaters and tanks are quoted in both units.

The figure is the box, not the water: glass thickness, substrate, rock and equipment displace water, so a full tank holds less than the arithmetic says. Each dimension is taken from 5 to 500 cm and a zero dimension is refused by name.

Why the rate is yours

A heater has to hold a tank above the room's temperature by the rise you want, and both of those are facts about the room rather than about the tank. A watts-per-litre figure compresses them into one number, which is why it is a control and why the page prints the rate it used.

The rate is taken from 0.1 to 10 W per litre. The page does not choose a heater, a brand or a thermostat, and it says so where the answer is read rather than only in the copy.

How to use Aquarium Heater Wattage Calculator

Set Tank length, Tank width and Tank height to the inside dimensions in centimetres.

Set Watts per litre to the figure you are sizing to.

Press Run. The result prints the volume in litres and gallons and the heater wattage.

What to Expect

Best for

  • Turning a tank's dimensions into a volume in litres
  • Sizing a heater from a watts-per-litre figure you trust
  • Checking a volume quoted in gallons

Not ideal for

  • Choosing a watts-per-litre figure, which depends on the room
  • A tank with a sump or an unusual shape
  • A manufacturer's heater specification

What this tool keeps

  • The three dimensions and the rate
  • The volume in litres and gallons and the wattage

What may need cleanup

  • A tank measured in inches, which has to become centimetres
  • A stated volume that has to be checked against its dimensions

Common errors

  • Using the outside dimensions rather than the inside ones
  • Treating the volume as the water a full tank holds

Example use cases

  • Sizing a heater for a 60 cm tank
  • Converting a tank's dimensions to litres
  • Checking a quoted gallon volume against its dimensions

Sample input

A 60 × 30 × 40 cm tank at 1 W per litre.

Sample output

72 L, 19.0204 US gallons and a 72 W heater.

Who this is for

  • An aquarist sizing a heater from a tank's dimensions
  • Anyone checking a tank volume quoted in gallons

Frequently asked questions

Why does the page not pick a heater for me?

Because the heater's job depends on the room's temperature and the rise you want, neither of which is on the page. A watts-per-litre figure folds them into one number, and the page takes yours rather than inventing a specification.

Is the volume the water the tank holds?

No. It is the inside volume of the box; glass thickness, substrate, rock and equipment take up space. For a stocked tank the water volume is lower, and the page says the figure is the box rather than the water.

Why are gallons printed as well as litres?

Because tanks and heaters are quoted in both units and a US gallon is 3.785411784 litres, not the imperial gallon. The page prints the US figure and names it, so a UK gallon reading is not mistaken for this one.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.