Make a QR Code: A Beginner's Guide
Quick answer
Open QR Code Generator, paste the link or text, leave the error correction at M and the width at 320, and press Run. You get an SVG QR code you can download and place anywhere. Before you print a hundred of them, scan the symbol with two different phones at the size it will actually be printed. The scan is the only test that matters.
What this article covers
The first pass: what a QR code is encoding when you use this tool, what each of the six fields does, the order to set them in, and how to test the result. It also says what the tool does not do — no tracking, no short links, no expiry — so nobody plans a campaign around a feature that is not here.
What it actually does
A QR code is a square grid of dark and light modules. A scanner reads that grid as bytes, error-corrects what it read, and gives back the text you encoded. The important consequence is that the text is inside the symbol. There is no redirect in the middle: if you encode a URL, the phone opens that URL, and if the page behind it moves, the code is dead. This tool does not create a short link, does not count scans, and does not let you change the destination later.
The encoder uses Reed–Solomon error correction, the same family of codes used in CDs and in data transmission. That is what lets a scanner recover a symbol with a scratch, a shadow or a fold across it. The error correction level chooses how much damage the symbol can survive: L recovers about 7 per cent, M about 15, Q about 25 and H about 30. More resilience means more modules for the same text, so the symbol gets denser — and a denser symbol needs to be printed larger to stay readable.
The output is an SVG rather than a bitmap. That matters most for print: an SVG can be scaled to any size without turning into stair-steps, so the same file works on a business card and on a poster.
Step by step
- Decide what the code should open. Test the URL in a browser first; a typo is the most expensive mistake here.
- Paste it into the input box. Keep it as short as the destination allows — every character costs modules.
- Choose the error correction level. M is a good default; H is worth it when the code will be handled, folded or partly covered.
- Set the symbol width. 320 pixels is a sensible screen default; for print, the physical size matters more than the pixel number.
- Leave the quiet zone at 4 modules unless a designer asks for more. Below 4 is refused because the specification needs it.
- Set the module colour to a dark colour on a light background. Keep the contrast strong.
- Add a caption only if one is useful; it is composed below the symbol and adds height.
- Run, download the SVG, and scan it from the screen before you send it anywhere.
What to check after download
- Scan it from the screen, with the phone you actually carry, at 100 per cent.
- Scan it in print on a proof, at the size it will be printed.
- Check the destination, not just that a scanner recognised something. Many scanner apps show the decoded text; read it.
- Check the quiet zone around the symbol is clear of other artwork.
- Check the contrast by looking at the code from a metre away — if it looks grey, it will scan badly.
- Check the caption does not intrude on the quiet zone.
- Check the file format is one your printer accepts; SVG is a vector and most print workflows prefer it.
Common beginner mistakes
Printing a code too small for its density. A code with a long URL and level H has many modules; at 2 cm wide the modules are too small for a phone camera at arm's length. Shorten the URL or lower the level.
Encoding a URL that only works on the office network. A QR code on a poster is scanned by strangers, on mobile data. Test on a phone with Wi-Fi off.
Putting a logo over the middle without raising the error correction. The level exists to survive exactly that kind of damage, but it has to be chosen before the symbol is generated.
Assuming the code can be edited later. It cannot. A printed QR code is a commitment to the bytes inside it; if the destination must change, encode a URL on a domain you control so the page can redirect.
When this tool is the right choice
When you need a static symbol that carries a short piece of text or a URL, and you want a vector file you can print at any size. Menus, packaging, labels, invoices, business cards, feedback cards, event badges. It is the wrong tool when you need scan counts, a changeable destination, or geofencing — those are services, not encoders, and this page does not pretend to be one.
Related tools
If the code is going on a printed sheet beside a picture, Resize an Image prepares the artwork at the right pixel size. If the code and its instructions have to travel as one document, Merge PDF Files combines the pages. If the sheet starts as a PDF, PDF Converter turns it into images for a screen.
Use this tool
Generate the symbol on QR Code Generator, then scan it from the screen and again from a proof before the real print run.
Next step
Read the FAQ and checklist for the questions that come up before a print run: size, contrast, error correction and what to do when a scanner refuses the symbol.
Continue Exploring
Browse more release notes and the tools they reference.